1#@!#!123s

Path : /../dev/../../bin/
Filename : scsi_logging_level
#! /bin/bash
###############################################################################
# Conveniently create and set scsi logging level, show SCSI_LOG fields in human
# readable form.
#
# (C) Copyright IBM Corp. 2006
#
# Modified by D. Gilbert to replace the use of sysctl [20080218]
# Lat change: D. Gilbert 20150219
###############################################################################


REVISION="1.0"
SCRIPTNAME="scsi_logging_level"

declare -i LOG_ERROR=0
declare -i LOG_TIMEOUT=0
declare -i LOG_SCAN=0
declare -i LOG_MLQUEUE=0
declare -i LOG_MLCOMPLETE=0
declare -i LOG_LLQUEUE=0
declare -i LOG_LLCOMPLETE=0
declare -i LOG_HLQUEUE=0
declare -i LOG_HLCOMPLETE=0
declare -i LOG_IOCTL=0

declare -i LEVEL=0

SET=0
GET=0
CREATE=0

OPTS=$(getopt -o hvcgsa:E:T:S:I:M:L:H: --long \
help,version,create,get,set,all:,error:,timeout:,scan:,ioctl:,\
midlevel:,mlqueue:,mlcomplete:,lowlevel:,llqueue:,llcomplete:,\
highlevel:,hlqueue:,hlcomplete: -n \'$SCRIPTNAME\' -- "$@")
eval set -- "$OPTS"

# print version info
printversion()
{
    cat <<EOF
%S390_TOOLS_VERSION% ($SCRIPTNAME $REVISION)
(C) Copyright IBM Corp. 2006
EOF
}

# print usage and help
printhelp()
{
    cat <<EOF
Usage: $SCRIPTNAME [OPTIONS]

Create, get or set scsi logging level.

Options:

        -h, --help       print this help
        -v, --version    print version information
        -s, --set        create and set logging level as specified on
                         command line
        -g, --get        get current logging level and display it
        -c, --create     create logging level as specified on command line
        -a, --all        specify value for all SCSI_LOG fields
        -E, --error      specify SCSI_LOG_ERROR
        -T, --timeout    specify SCSI_LOG_TIMEOUT
        -S, --scan       specify SCSI_LOG_SCAN
        -M, --midlevel   specify SCSI_LOG_MLQUEUE and SCSI_LOG_MLCOMPLETE
            --mlqueue    specify SCSI_LOG_MLQUEUE
            --mlcomplete specify SCSI_LOG_MLCOMPLETE
        -L, --lowlevel   specify SCSI_LOG_LLQUEUE and SCSI_LOG_LLCOMPLETE
            --llqueue    specify SCSI_LOG_LLQUEUE
            --llcomplete specify SCSI_LOG_LLCOMPLETE
        -H, --highlevel  specify SCSI_LOG_HLQUEUE and SCSI_LOG_HLCOMPLETE
            --hlqueue    specify SCSI_LOG_HLQUEUE
            --hlcomplete specify SCSI_LOG_HLCOMPLETE
        -I, --ioctl      specify SCSI_LOG_IOCTL

Exactly one of the options "-c", "-g" and "-s" has to be specified.
Valid values for SCSI_LOG fields are integers from 0 to 7.

Note: Several SCSI_LOG fields can be specified using several options.
When multiple options specify same SCSI_LOG field the most specific
option has precedence.

Example: "scsi_logging_level --hlqueue 3 --highlevel 2 --all 1 -s" sets
SCSI_LOG_HLQUEUE=3, SCSI_LOG_HLCOMPLETE=2 and assigns all other SCSI_LOG
fields the value 1.
EOF
}

check_level()
{
    num=$(($1))
    if [ $num != "$1" ] ; then
        invalid_cmdline "log level '$1' not a number"
    elif [ $num -lt 0  ] || [ $num -gt 7 ] ; then
        invalid_cmdline "log level '$1' out of range, expect '0' to '7'"
    fi
}

# check cmd line arguments
check_cmdline()
{
    while true ; do
        case "$1" in
            -a|--all)   _ALL="$2"; check_level "$2"
                        shift 2;;
            -c|--create) CREATE=1;
                        shift 1;;
            -g|--get)   GET=1
                        shift 1;;
            -h|--help) printhelp
                        exit 0;;
            -s|--set)   SET=1
                        shift 1;;
            -v|--version) printversion
                        exit 0;;
            -E|--error) _ERROR="$2"; check_level "$2"
                        shift 2;;
            -T|--timeout) _TIMEOUT="$2"; check_level "$2"
                        shift 2;;
            -S|--scan)  _SCAN="$2"; check_level "$2"
                        shift 2;;
            -M|--midlevel) _ML="$2"; check_level "$2"
                        shift 2;;
            --mlqueue)  _MLQUEUE="$2"; check_level "$2"
                        shift 2;;
            --mlcomplete) _MLCOMPLETE="$2"; check_level "$2"
                        shift 2;;
            -L|--lowlevel) _LL="$2"; check_level "$2"
                        shift 2;;
            --llqueue)  _LLQUEUE="$2"; check_level "$2"
                        shift 2;;
            --llcomplete) _LLCOMPLETE="$2"; check_level "$2"
                        shift 2;;
            -H|--highlevel) _HL="$2"; check_level "$2"
                        shift 2;;
            --hlqueue)  _HLQUEUE="$2"; check_level "$2"
                        shift 2;;
            --hlcomplete) _HLCOMPLETE="$2"; check_level "$2"
                        shift 2;;
            -I|--ioctl) _IOCTL="$2"; check_level "$2"
                        shift 2;;
            --) shift; break;;
            *) echo "Internal error!" ; exit 1;;
        esac
    done

    if [ -n "$*" ]
    then
        invalid_cmdline invalid parameter "$@"
    fi

    if [ $GET = "1" -a $SET = "1" ]
    then
        invalid_cmdline options \'-c\', \'-g\' and \'-s\' are mutual exclusive
    elif [ $GET = "1" -a $CREATE = "1" ]
    then
        invalid_cmdline options \'-c\', \'-g\' and \'-s\' are mutual exclusive
    elif [ $SET = "1" -a $CREATE = "1" ]
    then
        invalid_cmdline options \'-c\', \'-g\' and \'-s\' are mutual exclusive
    fi

    LOG_ERROR=${_ERROR:-${_ALL:-0}}
    LOG_TIMEOUT=${_TIMEOUT:-${_ALL:-0}}
    LOG_SCAN=${_SCAN:-${_ALL:-0}}
    LOG_MLQUEUE=${_MLQUEUE:-${_ML:-${_ALL:-0}}}
    LOG_MLCOMPLETE=${_MLCOMPLETE:-${_ML:-${_ALL:-0}}}
    LOG_LLQUEUE=${_LLQUEUE:-${_LL:-${_ALL:-0}}}
    LOG_LLCOMPLETE=${_LLCOMPLETE:-${_LL:-${_ALL:-0}}}
    LOG_HLQUEUE=${_HLQUEUE:-${_HL:-${_ALL:-0}}}
    LOG_HLCOMPLETE=${_HLCOMPLETE:-${_HL:-${_ALL:-0}}}
    LOG_IOCTL=${_IOCTL:-${_ALL:-0}}
}

invalid_cmdline()
{
        echo "$SCRIPTNAME: $*"
        echo "$SCRIPTNAME: Try '$SCRIPTNAME --help' for more information."
        exit 1
}

get_logging_level()
{
    echo "Current scsi logging level:"
#   LEVEL=$(sysctl -n dev.scsi.logging_level)
    LEVEL=$(cat /proc/sys/dev/scsi/logging_level)
    if [ $? != 0 ]
    then
        echo "$SCRIPTNAME: could not read scsi logging level" \
             "(kernel probably without SCSI_LOGGING support)"
        exit 1
    fi
}

show_logging_level()
{
    echo "/proc/sys/dev/scsi/logging_level = $LEVEL"

    LOG_ERROR=$((LEVEL & 7)); LEVEL=$((LEVEL>>3))
    LOG_TIMEOUT=$((LEVEL & 7)); LEVEL=$((LEVEL>>3))
    LOG_SCAN=$((LEVEL & 7)); LEVEL=$((LEVEL>>3))
    LOG_MLQUEUE=$((LEVEL & 7)); LEVEL=$((LEVEL>>3))
    LOG_MLCOMPLETE=$((LEVEL & 7)); LEVEL=$((LEVEL>>3))
    LOG_LLQUEUE=$((LEVEL & 7)); LEVEL=$((LEVEL>>3))
    LOG_LLCOMPLETE=$((LEVEL & 7)); LEVEL=$((LEVEL>>3))
    LOG_HLQUEUE=$((LEVEL & 7)); LEVEL=$((LEVEL>>3));
    LOG_HLCOMPLETE=$((LEVEL & 7)); LEVEL=$((LEVEL>>3));
    LOG_IOCTL=$((LEVEL & 7))

    echo "SCSI_LOG_ERROR=$LOG_ERROR"
    echo "SCSI_LOG_TIMEOUT=$LOG_TIMEOUT"
    echo "SCSI_LOG_SCAN=$LOG_SCAN"
    echo "SCSI_LOG_MLQUEUE=$LOG_MLQUEUE"
    echo "SCSI_LOG_MLCOMPLETE=$LOG_MLCOMPLETE"
    echo "SCSI_LOG_LLQUEUE=$LOG_LLQUEUE"
    echo "SCSI_LOG_LLCOMPLETE=$LOG_LLCOMPLETE"
    echo "SCSI_LOG_HLQUEUE=$LOG_HLQUEUE"
    echo "SCSI_LOG_HLCOMPLETE=$LOG_HLCOMPLETE"
    echo "SCSI_LOG_IOCTL=$LOG_IOCTL"
}

set_logging_level()
{
    echo "New scsi logging level:"
#   sysctl -q -w dev.scsi.logging_level=$LEVEL
    echo $LEVEL > /proc/sys/dev/scsi/logging_level
    if [ $? != 0 ]
    then
        echo "$SCRIPTNAME: could not write scsi logging level $LEVEL"
        echo "  kernel does not have SCSI_LOGGING support or needs superuser"
        exit 1
    fi
}
create_logging_level()
{
    LEVEL=$((LOG_IOCTL & 7)); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_HLCOMPLETE & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_HLQUEUE & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_LLCOMPLETE & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_LLQUEUE & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_MLCOMPLETE & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_MLQUEUE & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_SCAN & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_TIMEOUT & 7))); LEVEL=$((LEVEL<<3))
    LEVEL=$((LEVEL|(LOG_ERROR & 7)))
}

check_cmdline "$@"

if [ $SET = "1" ]
then
    create_logging_level
    set_logging_level
    show_logging_level
elif [ $GET = "1" ]
then
    get_logging_level
    show_logging_level
elif [ $CREATE = "1" ]
then
    create_logging_level
    show_logging_level
else
    invalid_cmdline missing option \'-g\', \'-s\' or \'-c\'
fi